UFS-156 More Electrical Diagrams Stencil or Circuit Template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When it comes to electronic symbols, more is better. There are many unique shapes to capture the function of the device.
- Ocena
- 5 / 5
- Polubienia
- 116
- Pobrania
- 478
- Wydruki
- 1
- Wyświetlenia
- 2678
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am a semi-professional electronic hobbyist. Normally I would draw electrical diagrams on a computer, but once in a while it can be faster to jot an idea down.
I found a very elegant stencil and was almost ready to print it out. But then I got looking at how few symbols were available, about a dozen. Nothing for resistors, inductors, switches, transistors, etc. I like to keep my designs simple, but not that simple.
What choice is there but to design your own. I was off to design my own with the common shapes you need. Best is you can combine the shapes for more elaborate components. E.g. two inductors and some lines creates a transformer. A resistor with two small arrows, gives you a photo resistor. There are lots of possibilities.
There are two stencils but the B version is better. I found that I preferred to print face down for a smooth surface. Depending on your flow, you may have to clean up some areas with an exacto knife.
The widths are 0.7mm to give a little clearance and use a 0.5mm pencil lead. You can scale up if you want. You can also print thicker by changing the z scale on your slicer.
Have fun.