articulated Leopard Shark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an articulated model of a leopard shark, print-in-place, no supports or brim
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 632
- Wydruki
- 1
- Wyświetlenia
- 1512
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This leopard shark I actually made before the blacktip reef shark but I wasn't happy with it at first so I worked on it a bit longer. However I'm still not satisfied with the joint of the fin. It's too fragile and rigid for my taste, but it's functional and prints without issues, so I'll leave it like that for now.
Model size: 220.7 mm x 71.2 mm x 33.8 mm
This model is only for private use, please don't sell or upload my models or prints.
The model is print-in-place and doesn't require a brim or supports. You can add a small support underneath the snout but i haven't had any problems printing without it.
I haven't tried scaling the model, so i can't say how well it'll work and i wouldn't recommend scaling this one down because of the joints. Scaling it up might still work though.
As always, if you decide to print one of these cute sharks, i would love to see them.
Printer: Anycubic Vyper
Print settings: 10% Infill, 0.2mm layer height, no brim, no supports
Printer settings: 200°C nozzle temp. (0.4mm), 60°C bed temp.
Filament: PLA (in the pictures: Eryone silk green&blue)
If there are any other issues please let me know so i can try and fix them.