Washington, USA (WA) Topographic Map with Hydrographic Features
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scaled up to 255mm width and set-up for dual color printing via OrcaSlicer and Bambu X1 Carbon with an AMS.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Share Alike
Huge Thanks
First off, huge thanks to @ansonl for the great “Washington, USA (WA) Topographic Map with Hydrographic Features” model!
Changes
This is primarily just a 3mf set-up for Bambu printers with an AMS, however, I did increase the size to 255.00 x 172.09 x 9.00 mm. Because this is geared toward AMS usage, I only included the “dual” files. I did not simplify the model, so it takes a hot minute to slice.
SLICING & PRINTING NOTES
I don't know why, but every time I open the file, the purge tower has relocated too close to the map, so make sure you move it before slicing!
It can take several minutes to actually slice.
On my Bambu X1 Carbon, this took a bit under 17 hrs to print.
My Make
wa-sqrt-dual-transparent-v1.3 scaled up to 255.00x172.09x9.00mm and printed with Overture Green Starlight PLA [1] & Amolen Transparent Blue PLA [2].
Nice, easy print!
I went with the square root scale and love it!
When I got the Overture Green Starlight, I was concerned that it would be too purple, but it turned out great! It's mostly green, but from different angles, it takes on a brownish color. It is more sparkly than I would have liked, but it still makes for a nice "land" color.
On the other hand, I ended up using a whiter section of the the Amolen Transparent Blue, which I really don't like. I may actually end up printing a second one, and explicitly start this filament at a stronger blue portion of the spool.
[1]: "OVERTURE Color Changeable PLA 1.75mm 3D Printer Filament Green Starlight PLA, 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer (Shimmer Bronze)" https://www.amazon.com/dp/B0CB46RM2H
[2]: "AMOLEN PLA 3D Printer Filament, Clear PLA Filament 1.75mm Transparent Blue White, with Light Transmission Feature, Compatible with Most FDM Printer, PLA Transparent, 1KG/2.2lb" https://www.amazon.com/dp/B0C7K99MTY