Curver pedal bin (pedaalemmer) lever bottom part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My toddler trashed our pedal bin. But no worry - this replaces the lever part between the pedal and the metal rod that…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 121
- Wydruki
- 3
- Wyświetlenia
- 763
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 2023-09-16: Added single piece print for suitable printers.
My toddler trashed our pedal bin. But no worry - this replaces the lever part between the pedal and the metal rod that lifts the lid.
Split into two parts so you can print it on a regular 3d printer with strength in the right direction.
Fusion 360 archive included to allow further tinkering.
Print Settings
Printer:
Creality CR-6 SE
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Anet PLA Black
Notes:
Where strength is needed, print more walls. For speed, I printed with a 0.8mm nozzle.
Post-Printing
Assembly
- Glue it together with fast glue.
Category: Household