EIBOS Easdry filament dryer latch replacement mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement latch mechanism for EIBOS Easydry series X filament dryer, since my broke
- Ocena
- 4,75 / 5
- Polubienia
- 20
- Pobrania
- 92
- Wydruki
- 3
- Wyświetlenia
- 430
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
My Easydry door mechanism broke, the string that you'd pull to open the dryer got torn apart. I designed a replacement. You'll need to print the 2 parts and you'll need an M3x18 bolt and M3 low profile nut.
Unlike the original, this works in a way that you can screw the handle to lock the doors from opening. If you want to put the spring back as the original has it, you can put a 2m diameter toothpick there, so the spring stays in place. Just cut the toothpick to like 10mm length and insert it into the hole. I'm using the locking mechanism, so no pick needed.