1 / 3
ACT-31B Key Ring Transmitter Visor Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A visor mount for the ACT-31B key ring transmitter.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I addressed a recurring problem of forgetting my parking fob in the office. To resolve this issue, I came up with a case resembling a garage door opener to secure it in place in my car.
I would have made the lid snap into place if I were clever. But I refuse to let perfection be the enemy of done.
This case assumes the following:
- Adding roughly 1mm piece of rubber to the front and rear of the internal cavity. I used a piece of spare inner tube to line the inside of the cavity to make it a tight and silent fit.
- You're using *these visor clips.
- 4 x *5mm M3 button head bolts
- 2 x *M3 nuts
Affiliate Link Disclaimer
*This link contains an affiliate link for me. This costs you nothing and helps support me.