Plugwise Smile Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a Plugwise system to control and measure the power outlets and solar panels. As an addition, there is a Smile…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I have a Plugwise system to control and measure the power outlets and solar panels. As an addition, there is a Smile to monitor the power meter. It is a small box that hangs from cable.
Because the cables always messed up I decided to put the Smile on the wall. It doesn't have any mounting holes, so I made a mounting bracket/case.
Print Settings
Printer:
Noto i3 MK3
Rafts:
No
No
Resolution:
0.2 mm
20%
Filament: Das Filament PLA Green
Notes:
The Noto is a Prusa MK3 clone my wife build.
Mounting
I used countersunk wood screws 3.0 x 16 .mm
Category: Electronics