Magnet Stirrer Helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My hands are way to big to fish small parts out of the beaker glass I use on a magnet stirrer to clean my SLA prints.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use a magnet stirrer for cleaning my Resin prints, but somehow the IPA couldn't quite flow. So I created a little helper.
Place the lower part into the glass, put the printed parts on the upper part and place the upper part on the lower part in the glass. Switch the magnet stirrer on and clean your parts.
I designed the helper in two parts. a lower part that stays in the glass and makes the IPA circulate and a upper part to put the prints on. There are two vrsions of the upper part. One with 10mm spikes and another with 20mm spikes.