1 / 5
p3steel front and rear strengthening beam with endstop mount — zdjęcie 1
1 / 5

p3steel front and rear strengthening beam with endstop mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

On my p3steel I found that after a while the front and rear had started to bend due to the belt tension and the belt…

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
150
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

On my p3steel I found that after a while the front and rear had started to bend due to the belt tension and the belt would move this part has worked a 100% and now there is no more bending and the printer is a little less noisy it must be printed at 80% infill or more.

Print Settings

Printer Brand:

RepRap

Printer:

P3Steel

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Infill:

80% or more

Category: 3D Printer Parts

Tagi