Mossberg 464 magazine tube follower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom design for a Mossberg 464 .30-30WCF lever action magazine tube follower.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My dad has a Mossberg 464 .30-30WCF lever action rifle. There is a big known issue with the factory orange plastic follower jamming in the magazine tube. My dad sent me a drawing of dimensions he wanted and I designed two new followers in Fusion360 for him to try.
Note: I use Cura as my slicer. I don't know if this will happen with other slicers, but the object will be scaled oversized when opened in Cura. I don't know how to fix this in the modeling. So, you need to first rotate the follower to stand on end. Then resize it to be 34.925 mm/1.375" tall on the Z axis. Make sure to have the uniform scaling box checked.
I printed these at standard quality .2mm layer height, 50% infill, with a 4mm nozzle out of PLA.