Stanley Blade Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Getting into the sticky bits!
- Ocena
- 4,75 / 5
- Polubienia
- 30
- Pobrania
- 281
- Wydruki
- 4
- Wyświetlenia
- 1010
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a simple handle for a standard Stanley blade, and I could not find what I wanted, so I made my own.
I've been using one of these for over a year to scrape the beds of my printers and other stuff around the workshop, and it has never failed me.
Given I've used it for such a long time, i figured I might as well share the file for it.
To assemble this, you need:
1x Stanley blade
2x M3x4 bolt
2x M3 nuts
Its oriented, ready to print, no supports.
0.2 layers, 4 walls and 30% infill recommended. Would not recommend higher layers, as this breaks the built in supports for the nuts.
Like my work? Support me on Ko-fi!