Nightstand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nightstand that attaches to the side of the bed, room for a phone with charger and a water bottle.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Share Alike
This is a pretty tall print, if you want to print it as one piece it requires 250mm build height and supports for the little edge of the table.
I choose to print it as two parts by splitting it in the slicer, and then glueing the parts together. This avoids supports and reduces the risk of the print falling over during printing. I included a connector piece that makes it easy to align the parts and glue them together.
Depending on the fabric of your bed, i may be good to add some velcro strips where the table gets pinched.