Eye drops hip flask eyedrops eye drop container carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use this model as transport container for single use eye drops and its design is inspired by hip flasks.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Standard Digital File License
This is a hip flask style container to transport/carry single use eye drops. The “hip flask style” design was chosen by me, as it makes it comfortable to carry in the pocket. (In German: Flachmann)
The lid can be opened and closed by rotating the screw on top - just like you would open a hip flask to take a sip.
The lid and the screw are connected. After assembly there are only two parts: the lid and the box.
Assembly:
- Put the screw through the hole in the lid
- screw the long nut on it from the other side
- The side with the short thread is to be used for the screw
- you can put a small amount of superglue on the tip of the screw
- be careful not to glue the screw to the lid
- Now you can easily put the lid on the box, rotate the screw a bit and it is closed. The eyedrops are protected and stay clean.
I will make a bigger one for 6 ophtioles, so stay tuned if you are interested.
If you found this model usefull, please be so kind and leave a like - or even better: a Make and a rating. Thanks!
Printing
- Print with 0.2 layer in quality mode
- 0.4 nozzle
Disclaimer: This is not a medical device tested to any standards or regulations. I use it to carry my single use eye drops around and it works well for me.
But you are responsible for anything you do with this yourself.
Follow the instructions on the package insert of the eye drops you use.
By downloading or using these models, you agree to indemnify and hold harmless the provider from any liability associated with the use of these models.