Filament filter for Original Prusa i3 MK3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This filament filter is designed to hold a 20x20x20mm filament cleaner "sponge" from Voltivo at the filament entry…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This filament filter is designed to hold a 20x20x20mm filament cleaner "sponge" from Voltivo at the filament entry point of an Original Prusa MK3. But you can use any other sponge with the same size.
Since it significantly increases the height of the moving tool (by 3 cm) you should be careful when printing tall objects because it may crash into the filament spool or any other additional extensions you may have placed there. I recommend using it with the filament spool not over the printer.
Print Settings
Print it upside-down and with supports only over the build plate.
Post-Printing
Place the sponge inside with the correct diameter hole.