3d Lithophane Cube, Canada and South Africa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6 part lithophane cube with the flags and maps of Canada and South Africa
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Gift I made for a friend to give to relatives. His family has moved from SA to CA over the years, but many are still home. These will be given as gifts to the family members still back home.
Designed for an LED Tea Light, NOT A REAL FLAME!!!!!
The sides were made with the lithophane generator found at
https://lithophanemaker.com/Framed%20Lithophane.html
With the following settings
Frame Options: Frame Only
Lithophane Resolution: 0.2
Base Length: 100
Base Width: 2.5
Base Height: 7.5
Overhang Angle: 60
Maximum Thickness: 2
Minimum Thickness: .8
Height: 100.00
Support Thickness: 2
Support Angle: 75
X Shift: 0.5
Y Shift: 0.5
Rectangle Scale: 1.0
The bottom and top are hand sculpted in Tinkercad.
I printed the sides at .2mm layers, and the top/bottom were printed at .25mm