Pottery trimming tool slider grip - remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This has a taller pad than the original. In addition these pads have a 5° draft angle to help push down on the pot.…
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 2060
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This has a taller pad than the original.
In addition these pads have a 5° draft angle to help push down on the pot. The sliders have a loose fit and the original ones can actually push upward on the pot as they tighten.
Also, it is double-sided, with a 75mm (3 inch) and 150 mm (6 inch) diameter curves. Just flip it around!
I recommend some 1/4” thick adhesive backed foam. Leave a gap at the bottom of the slider when the foam is applied, this will also help push downward.
Goes with this trimming accessory. https://www.thingiverse.com/thing:6213624
Category: Art Tools