PACMAN 3d playfield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D playfield for Pacman Arcade 284x221mm
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is my creation to celebrate the old and famous Pacman playground.
Printing settings:
All parts are printed in PLA with 0,4mm nozzle and 0,2mm layers, without supports and adhesions.
Printed at 100% it becomes 284x221mm.
Base
Score points and dots are on 0,6mm relieve so you can change printing color at the last 2 layers. There are also other smaller dots to attach all the table game frames
Table frames
Also table frames are with relieve to change printing color at the last 2 layers. There are small guided-holes for attaching them to the base (I used a small drop of common cyanoacrylate glue in the base dots)
Pacman & Ghosts (I had to paint with markers because I don't have all the colors)
Pacman is all yellow.
Blinky (red), Pinky (pink), Inky (Cyan) and Clyde (orange) have the eyes (white) and pupils (blue) on relief so you can change the color 2 times.
Blinky looks to the left, Pinky to the right, Inky to the bottom and Clyde to the top but you can change the main color as you like depending on where you want to place them on the table.
The “Blue ghost” is only blue and white.
All characters have a hole on the back to be centered on the table dots.
Fruits
The fruit has a first black square layer to secure the stalk and small cherries.
Also fruit has a hole on the back to be centered on the table dots.