5" Sanding Disc Holders With Labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5" Sanding disc holders with screw holes for wall mounting. Multiple variations
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 189
- Wydruki
- 1
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a simple 5" sanding disc storage container. Inside width is 2" which snugly fits 50 most 5" discs. E.g.: My 50 pack of 5" 180 grit 3M extract fit or 50 pack of cheap 5" generic 240 grit fit but a 50 pack of 60 grit I have will not completely fit.
I have not printed every variation posted or any of the light version. If you print a light version please let me know how it turns out. I have only printed the three disc holders for 40 grit through 400. In the pictures you may notice the radiused portion appears segmented. This is a result of how the software I modeled exports to the STL format. Working on getting this corrected when I have the time.
I printed these with four wall and 20% Infill. The holders are an 1/8" thick at all walls.