1 / 4
Violin Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mount for Violin, holds bottom two pegs.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 168
- Wydruki
- 3
- Wyświetlenia
- 898
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (27)Powiązane
Hardware:
#8 Screws
Print setting should not matter too much but here is what I used.
Orientation: Shown in photo
Material: PLA
Perimeters: 3
Infill: 15% (Adaptive Cubic)
Supports: None