DIY powder coating booth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple powder coating booth you can make with simple tools out of MDF.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 2096
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The booth was made mostly by hand out of MDF. I highly recommend building the booth out of plywood, MDF is not the best choice.
Here you can buy the powder coating gun I use from my store:
https://indystry.cc/product/powder-coating-gun/
There are three in my opinion super important parts of any powder coating booth.
- Filtering system
- Light
- Rotating system
To build the filtering system I designed my own box fan that was 3d printed and used cheap BLDC motors. Unfortunately in Europe, box fans are not popular and in Poland, it’s impossible to buy a box fan. So making these on my own was the only choice for me. If you have access to box fans just buy something inexpensive.
My tools for powder coating:
3M mask: https://amzn.to/3RiThRk
Mini oven: https://amzn.to/3RAX6Sn
Air compressor: https://amzn.to/47QP4vj
Powder coating paint: https://amzn.to/3RKLVI5
Powder coating hooks: https://amzn.to/47SEwfo
LED strip: https://amzn.to/487XbDB
You can use cheap LED strips to make very good light for your booth. I used the waterproof version of the LED strips but I don’t think it is necessary. With a simple plastic bracket bought in a hardware store, these were attached to the booth.
The rotating system was simply 3D printed. Additional big bearing and some wooden sticks resulted in a perfect little carousel for painting the parts and rotating them around. The bearing was used not only to rotate the part but also for grounding the part while painting.
More information: https://indystry.cc/how-to-diy-powder-coating/
Video about the project: