Modular Glasses Display Stand (Snap-fit supportless)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have designed my own modular Glasses display stand as fun little challenge. The idea was to be able to expand it to…
- Ocena
- 4,4 / 5
- Polubienia
- 49
- Pobrania
- 301
- Wydruki
- 3
- Wyświetlenia
- 1699
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I have designed my own modular Glasses display stand as fun little challenge.
The idea was to be able to expand it to your own needs, whether you have 2 or 10 glasses, you can "infinitely" extend the base to fit your needs!
Each piece is printed flat, and then snap fits together to create a sturdy structure to hold up your glasses.
You'll need a Base_Stand, and HolderCenter_Base and HolderBack to start with, then each pair of glasses you add, requires another set of HolderCenter_Ext + HolderBack.
To finish it off looking nicely, you can print the HolderTop (not required, but adds extra sturdiness to the structure, so definitely advised).
Hope you enjoy this, I had fun making it, and if you end up printing one, please share through the "Makes" tab! :D
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.2mm
Infill:
25% Gyroid
Filament:
123-3d Jupiter PLA Black
Category: Glasses