Memory Card Tower/Holder (PS1/PS2/GameCube)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed these in 0.3mm height all in one go - which took around 4 hours to complete a full set. Result snaps…
- Ocena
- 4,833 / 5
- Polubienia
- 109
- Pobrania
- 458
- Wydruki
- 9
- Wyświetlenia
- 2511
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed these in 0.3mm height all in one go - which took around 4 hours to complete a full set. Result snaps together perfectly, and holds the MC's in place for easy storage.
Enjoy!
Update 3/4/2021
I have Added Extension pieces you can print, to infinitely scale the Towers to your memory card needs! You still need the Top/Bottom, and regular L/R pieces. But you can now print the EXT files, to go between the normal L/R files and the Top part.
Also fixed a fail I had in the GameCube version, where one of the inner support pieces (bottom one) wasn't symmetrical (visually driving me crazy, sorry if you already printed it!)
Update 2/12/2021
Added an updated version that adds support for the GameCube as well!
Uses the same Top/Bottom as the PS versions, but requires different L/R sides to be printed.
Category: Video Games