1 / 1
SKR-3 Motherboard Adapter for CR-10 — zdjęcie 1

SKR-3 Motherboard Adapter for CR-10

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter plate and other required files to fit the BTT SKR-3 motherboard in a CR-10 electronics enclosure

Ocena
0 / 5
Polubienia
1
Pobrania
33
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This adapter plate was created to fit a SKR-3 mainboard in my CR-10 v3 with direct drive.

This will require a hole to be cut in the CR-10 electronics case, I chose to make a rectangular hole (47 mm by 20 mm) for the USB port and SD card access and will design and upload a cover shortly.

Tagi