Wago 221 Inline 3-Way Splice Box (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wago 221 Inline 3-Way Splice Box remixed to fit 14/2 Romex.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 938
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was very impressed with the original model, but the hole in the 3-way was too small for my application, 14/2 Romex, so I remixed it to fit.
In the cover photo, the original is on the left and my remix is on the right.
(I started with the STLs, so I'm opting not to include object files or links to them at this time.)
I'm am, however, including my 3MF print settings file because I initially had some trouble getting a good, strong print of the original model. If you don't use my settings (which is reasonable since they're for my printer and environment), please take these 3 recommendations under advisement anyway:
Print the bottom couple of layers very slowly.
Mind your cooling as it will warp if you print 100% infill as I have.
Ensure you have 3 walls for the interior separators for a nice solid part.
Cheers!
&
Always Be Printing