Weighted iPhone MagSafe Dock (Bigger Cord Hole)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the Weighted iPhone MagSafe Dock that has a bigger cord hole.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 303
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I liked the MagSafe dock created by johanncc and remixed by frez_knee. After printing off the latter I found out that the cord on my knockoff MagSafe cable was too big to fit through the hole. This remix makes the hole bigger (~14.5mm total). I also couldn't find an appropriate o-ring for the base so I removed the o-ring cut out an replaced it with 3x 8mm foot holes. I found that the cheap MagSafe adapter I was using had a tight friction fit and removed both the setscrew holes from the original and the o-ring slot from the remix.
No changes were made to the plug screw; you will need to download that from johanncc's model. When I printed that at 100% it would not screw in; 98% worked perfectly though.
I filled mine with dry mortar powder since I had some extra floating around. That appears to work well so far.
I used this MagSafe charger with and these feet.