Dough Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6mm (1/4") thick spacers used with a rolling pin to achieve consistent dough thickness.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We bought some of these but had to stack them to get to 6mm (¼") thickness, and they didn't like to stay stacked. Made the strips the maximum length that would fit on my printer, then added “dog bone” connector pieces so they can be connected together.
Printed these in TPU mainly so they wouldn't slide around. No supports necessary. 15% honeycomb fill. I didn't choose the honeycomb for any particular reason other than wanting vertical walls so the print is relatively rigid in the 6mm direction. On my printer, the joiner pieces are snug enough they won't fall out if you turn the strip upside down, but can easily be removed with a finger. May glue them in if they tend to fall out or get lost.