Better tablet clamp for a tablet stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two axis tablet clamp add-on to the original spring loaded clamp.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got a tablet floor stand with spring loaded clamp. The original clamp is hard to use for large tablet and not too safely hold the tablet.
So I create a two axis tablet clamp add-on that bolted to the original clamp (I want to preserve the original metal ball joint behind the clamp).
Features:
- Front camera notch
- S-pen notch for easy take in/out
- USB port access hole
Each axis rod printed in two parts, to fit on Bambu Lab build plate. The long rod joint is strengtened with a bamboo chopstics as dowel.
Make sure all rods printed horizontally, so there is no weak layer adhesion issue.
You'll need 6 pairs of m3 60mm long nuts & bolts (cut sufficiently flush to the nuts holes).
Filament: PETG