1 / 4
Skadis SHAHE Caliper Mount - Skadis T-Nut Mounting System — zdjęcie 1
1 / 4

Skadis SHAHE Caliper Mount - Skadis T-Nut Mounting System

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Skadis mount for SHAHE 5100 Vernier calipers that utilises the T-Nut mounting system

Ocena
0 / 5
Polubienia
9
Pobrania
48
Wydruki
0
Wyświetlenia
470
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you're not familiar with the T-Nut Mounting System, go here first to see a video of it in action. It's an alternative way of mounting things to Skadis/Uppspel boards without having to use hooks, which makes designing and printing the mounts a lot easier. 

I just purchased an Uppspel (black Skadis) board the other day and wanted to print a mount for my caliper, I printed 2 mounts I found on here that looked good but neither were angled correctly to suit this model. 

I scanned the caliper and imported the image into Fusion and created a custom mount for this specific model. Mine is a SHAHE 1500, but it may work for other SHAHE models, or indeed other calipers in general. 

This model uses an M2.5 screw and I've got a 16mm in it but you could probably get away with a 12mm judging by how much is sticking out the back.

There is a small 45° lip at the front to prevent the calipers sliding off.

I printed this using PLA+ on an MK3S+ using the following settings:

  • 0.6mm nozzle
  • '0.30 (QUALITY)' layer height setting in Prusa slicer
  • 15% Grid infill
  • No supports

Tagi