1 / 2
Ender 3 V3 KE Dual 5015 Fan Duct with better airflow direction
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original model was shooting more air on the hot end so I made a cut that would allow more air on the build plate.
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 370
- Wydruki
- 5
- Wyświetlenia
- 3289
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 13)Remiksy (0)Kolekcje (102)Powiązane
The original model was shooting more air on the hot end so I made a cut that would allow more air on the build plate.
PLA will work but I would recommend at least PLA+, its best to use PETG,ASA,ABS or other high temperature resistance filaments.
No Supports needed.