F1 Desk Sign / Lamp - Printable without AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
F1 Logo Light Box. Designed for single-extruder printers (separate parts). Easy DIY LED assembly.
- Ocena
- 4 / 5
- Polubienia
- 52
- Pobrania
- 211
- Wydruki
- 1
- Wyświetlenia
- 944
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Start your engines! This is a custom Formula 1 Logo Light Box designed to brighten up the desk of any racing fan.
This was my very first light box design, created following the excellent tutorial by Ryan Lit on YouTube. I designed it specifically to be accessible for everyone—even if you don't have a multi-color printer.
Key Features
Single Extruder Friendly: The box and the logo insert are printed separately. You can simply print the box in black (or red!) and the logo insert in white/red, then assemble them. No AMS or painting required!
Custom Lighting: Features a dedicated cable pass-through hole in the back, sized for standard USB or LED strip cables.
Easy Assembly: Designed with a ledge to hold the faceplate securely.
Assembly Instructions
Print: Print the "Back_with_hole" and the logo parts.
Lights: Adhere your LED strip (5V USB strips work great) to the inside back panel of the box.
Wiring: Feed the power cable through the pre-cut hole in the back.
Finish: Press the logo insert into the front frame. Depending on your printer's tolerances, a drop of superglue (CA glue) might be needed to lock it permanently in place.
Print Settings
Material: PLA is perfect.
Infill:
Box: 100% infill (or high wall count) is recommended to prevent light from leaking through the plastic housing.
Insert: Standard 15-20% infill is fine, or 100% rectilinear if you want solid diffusion.
Supports: None required. The design prints flat.
Layer Height: 0.20mm.
Credits This design was inspired by and created following the tutorial here: https://www.youtube.com/watch?v=v8xa4dCCKeg
Happy Printing!