Water Barrel Trailer 1:87 H0 HO Scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A water barrel trailer in 1:87 = H0 scale
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 526
- Wydruki
- 1
- Wyświetlenia
- 1363
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
A water barrel trailer in 1:87 = H0 scale
Print Settings
Printer:
Creality CR 6 SE
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
25%
Filament:
whats available PLA, TPU for the tiresAny colour for the frame, grey or silver for the barrel Post-Printing =============
Glue the tow frame parts together. Use a piece of filament (heat it with a lighter and roll it on the table for getting it straight) as axle, glue or stick the wheels on.
Use 5mm of filament to align the two barrel halves, glue them together and glue the barrel on the trailer.
Get a very small steel nail and push it through the moving part of the towing bar, so that the other end is fixed in the frame. If you don't need a twistable towing bar, just glue the parts together.
Category: Vehicles