1 / 1
25mm NFC tag holder (fits Nespresso tags) — zdjęcie 1

25mm NFC tag holder (fits Nespresso tags)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tag holder for glue-on Nespresso NFC tags

Ocena
5 / 5
Polubienia
3
Pobrania
47
Wydruki
1
Wyświetlenia
416
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

New: If you don't want to glue the tag into the 3D print, use the snap-fit version instead 

This version uses some tabs to secure the tag into the holder

My office now uses this tags to dispense coffee pods. The tags come with a sticker so we can stick it anywhere, but i wanted a specific place to put the tag, so i took some measurements and worked on a tag holder

This tag fits rounded Nespresso tags that are around 25mm of diameter, but can also fit other tags of that same size

The tag is supposed to press fit inside of the holder, so you will have to play with the tolerances, but in case it doesn't fit, i've also worked in on a holder with a cover so you can glue the top cover to the holder (added bonus is that you can print with two colors)

 

Tagi