Premier1 Fence Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got annoyed with having to tie and untie my electronet fence every day, so I made this!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got annoyed with having to tie and untie my electronet fence every day, so I made this!
This latch is designed to snugly hold your endposts together while also not having the annoyance of untying and tying a string every day.
If you have a hard time getting the posts close enough together, you can scale the z axis on the model to make it shorter, meaning the posts don't have to be as closely in parallel with one another.
I printed mine in galaxy black Polymaker ASA at 40% infill and 4 walls. This may be overkill, but it has a satisfying click with it is latched and should do well in keeping my goats in.
Change Log:
- v2: Modified the geometry to allow more flex when opening. Added thumb “grips” so you don't have to press into sharp corners when releasing a pole. Rounded the sharp edges.
- v3: Modified the geometry again to make the flex point more robust. v2 broke after a month of daily use and warming weather. Please excuse the crummy print in the cover photo, the ASA is quite wet but I didn't want to waste it.