Filament Colorizer for FlashForge Adventurer 5m
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pretty much said it all in the title.
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 315
- Wydruki
- 1
- Wyświetlenia
- 4447
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This piece is designed to fit on top of the extruder assembly to colorize clear filament. It works best if you remove the front cover of the assembly before adding the colorizer.
To install:
- First remove any filament that has been loaded into the extruder. (You may need to cut short or purge remaining filament to make room for colorizer.)
-Next, remove the front plate from the extruder assembly and place the colorizer in the top opening.
-Replace the front plate, ensuring that the colorizer is sitting level and near-flush to the top of the assembly.
-Pick three Sharpies of your choosing to load into the colorizer.
-Once the Sharpies are firmly secured, load your filament as you normally would, allowing the clear filament to pass through the colorizer.