1 / 4
Remix of rubber band submarine body — zdjęcie 1
1 / 4

Remix of rubber band submarine body

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modified version of the rubber band submarine that helps with some issues

Ocena
4,333 / 5
Polubienia
15
Pobrania
173
Wydruki
3
Wyświetlenia
906
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This version helps solve some of the issues I was having with the original. it now rotates a little more freely and I increased the tolerance to make it more forgiving. This version requires a .4 nozzle and .2mm layer height or it might not work. I also would not recommend scaling or using materials with high layer adhesion as my version relies on what is basically a support interface between the propeller shaft and hull. Cooling is a must and if the propeller refuses to rotate you can pry the little slit where the propeller shaft enters the hull.