Wanhao i3 Plus IKEA Ledberg brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets for Wanhao i3 Plus (& possibly the other Wanhao i3 versions if the dimensions haven't changed?) to hold…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Brackets for Wanhao i3 Plus (& possibly the other Wanhao i3 versions if the dimensions haven't changed?) to hold IKEA's Ledberg strip lights, Provides wraparound lighting of the bed when used in conjunction with Ledberg Connectors (https://www.thingiverse.com/thing:121247).
No drilling or modding to frame is needed, brackets simply hook & clip onto frame.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
No
Supports:
No
1mm Layer Height
Infill:
20%
Notes:
For a full set of Ledberg lights 2 x top brackets & 4 x side brackets are needed. Print 1 first to check the tolerances of your printer & scale as necessary.
Rotate so flat on bed before printing.
Be weary if using the latest Ledberg fixtures (the newer 24v based ones rather than the older 12v ones), The newer 24v fixtures only support upto 3 strips per transformer (you either need to get a more powerful 24v transformer or use 2 separate circuits for the front & rear)
Updates
18/10/17 - Added top twin bracket (to hold a front light as well as a rear light to frame using the same bracket).
30/11/17 - Added side twin braket, it does slide down the sides but a dab of hot glue smeared on the plastic that touches the sides stops that.
Category: 3D Printer Accessories