CNC 3018 Cooling mount for Noctua NF-A4x10 FLX fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CNC 3018 Cooling mount for Noctua NF-A4x10 FLX fan
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cool drivers is necessary. My cnc 3018 from Banggood is overheating (drivers) so I want to cool it. I model this model in Fusion 360 for Dingqi Electronics cnc board. The board have 92mm wide and 72mm high. You just need to print, unscrew the nuts on the top, install the printed mount, screw the nuts, install the Noctua fan 12 VOLTS! (you can install it with the rubber Noctua mounts or the screws) and plug the noctua fan in to 12 VOLTS! red connector. Make sure to plug it in correct polarity (red on +, black on -).
Model orientation:

Print settings:
Perimeters: 3
Infill 10% (grid)
Layer height: 0.28