Origami style frame for instax photos
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print and fun to assemble
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a lot of fun designing my previous Origami stand for instax square cartridge. The origami design brings new possibility to printing 3D structure and it is so surprisingly reliable. However, one could only choose 1 photo per cartridge to frame it. What if you want to frame every single photo? Here I present the full design of Origami style frame for instax photos.
The frame is print-in-place and easy to assemble - you can refer to my pictures of the finished frame to see how it is folded. The frame should work in both portrait and landscape orientation. This time I included both for instax mini and instax square.
The design is optimized for 0.2 layer height. Other layer height might result in weaker folding lines. Any feedback is welcomed if you tested on other layer heights. I used PLA for printing. PETG, ABS or other less brittle material might be even more suitable.
Have fun printing and folding.