Jawa 500FL 1:10 by Ed van der Heijden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jawa 500FL
- Ocena
- 0 / 5
- Polubienia
- 90
- Pobrania
- 445
- Wydruki
- 0
- Wyświetlenia
- 1453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Supports: Yes
Resolution: Dynamic
Infill: 50% line
Filament brand: 195
Filament material: PLA
Rems do not use Supports!!
only rems: Speed 60mm/s
3 bolts m2 x 20mm
2bolts m2 x 6mm
With the cooperation of @mochr, I have given the Jawa 500FL a major upgrade.
The two rims have gone to a higher print level.
The rim file was 60 MB and you had to print support and wait to see if everything remained intact. Now this is a thing of the past, because I have developed a rim that no longer requires support and comes off the printer smoothly.
Two bolts have also been added to the front and rear wheels, so that they can now rotate properly. I have also added a number of files so that I can print out the fenders. These were not included in the original files. Of course I made the stand much better because it was very unstable. This is an important part to ensure that the motorcycle is stable.
The stat boards front and rear could not be printed with the nozzle 0.4. That's why I also designed other mudguards for this. I would like to thank @mochr for his beautiful design, which I really appreciate.