1 / 7
Anycubic M5S PRO - Heater Vent — zdjęcie 1
1 / 7

Anycubic M5S PRO - Heater Vent

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heater Vent for the Anycubic M5S PRO to redirect the air flow to the resin tank to avoid blowing dripping resin.

Ocena
0 / 5
Polubienia
14
Pobrania
175
Wydruki
1
Wyświetlenia
1076
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Anycubic M5S PRO includes combo heater/filter unit placed inside the chamber, it works great and helps to heat the environment to improve our prints and clean the air from VOCs.
In some circumstances could blow dripping resin all over the vat and inside the lid.

This piece, printed using ASA/ABS or resin with good temperature specs at your convenience, will redirect the airflow to the resin tank, reducing any potential blowing of dripping resin.

A simple but useful design could minimize this problem if you are affected.

Tagi