Articulated Universal Trigger for props and toys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This prints in place. Add a spring from a pen and you have a functioning, articulated, trigger you can add to any model
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 701
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
This very well might be my contribution to the 3D modeling world: An articulated, universal, trigger you can add to any model prop or toy.
In your model, design in a cavity 20mm long x 12mm high x 8mm wide. Print this trigger, add a spring from a pen, cram it in the cavity and you are good to go.
The spring cavity is 5mm in diameter by 14mm deep.
I designed it specifically to be printed at .2 resolution - I have no idea if it prints well at others. Breaking it in can be difficult, I've found PLA is easier than PETG.
I encourage anyone and everyone to expand and improve on this design and this concept.