1 / 1
Busy Box — zdjęcie 1

Busy Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this busybox using a bunch of inputs and outputs connected to an arduino mega.

Ocena
0 / 5
Polubienia
20
Pobrania
22
Wydruki
0
Wyświetlenia
741
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Here is my attempt on keeping my boy busy using this toy I made. I'm in a great rush, so I'm just going to post the BOM, arduino code, fusion3d project, and stl files. 

I do not use affiliate links. I only use them as a reference. Find the best source for you

  1. The wooden case was a gift so:
    1. you may alter my design to fit the box you have
    2. design the box and print it. I already made a placeholder for it in the fusion360 project
    3. design a frame to adapt it to a bigger case you have.
  2. The microcontroller I use is an arduino mega 2560. You should be able to find them anywhere relatively cheap and they have 50 pins or so. This should allow you to scale your thing without using an expansion board or other tricks.
  3. MEGA 2560 R3 Proto Prototype Shield  - this should allow you to solder everything to it without distroying the board
  4. 3 generic 10k potentiometers. the value doesn;t matter that much. The higher the resistance, the lower the consumption
  5. a single encoder
  6. 5 metallic switches - a few people agreed this might not be safe enough in case the kid falls onto it. I can't even find them anymore on aliexpress
  7. 5 plastic switches
  8. servomotor - I encourage you to use something significantly smaller. This is just something I had arouund
  9. 2 buzzers - one is enough tho'
  10. nokia 5110 display - unused yet. I only display an image on it.
  11. WS2815 led strip
  12. circle ws2815 led board
  13. Sonar sensor
  14. big metallic switch. can't find it anymore
  15. a random power bank board 
  16. a li ion cell. I would recoommend using a low capacity one in case anything bad happens.
  17. this model for the ultrasonic case and I bolted it to the case

Here is a video of it

Tagi