1 / 4
Plunger Head / Cap for Grease Tube - To use with Socket Extension bar 3/8 or 1/2 — zdjęcie 1
1 / 4

Plunger Head / Cap for Grease Tube - To use with Socket Extension bar 3/8 or 1/2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a way to squeeze grease out of the tube to fill my mini grease gun. Uses Socket Extension (Removable)

Ocena
0 / 5
Polubienia
7
Pobrania
86
Wydruki
1
Wyświetlenia
377
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I needed a way to squeeze grease out of the tube to fill my mini grease gun.

This made it simple.

Designed to use Socket Extension bar. The bar holds the plunger straight and gives you good leverage to ease grease out. The Head is just tight enough fit to stay on the bar, but will remain in the grease tube when the bar is removed ( You do not need to leave the socket bar in the grease, you only need it when applying). With twisting action the Plunger can be removed when done. However costs pennies to print. I will just print another.

2 Variations to suit 3/8"Dr or 1/2"Dr Socket Bar (3/8"Dr Version pictured)

For standard Grease Tubes with open bottom, and smaller opening at top ( Tube is approx 53mm Outer Diameter )

( My Mini Grease gun fits exactally over the top opening, holding tight I was able to push the plunger in and fill the grease gun with no mess at all )

-----------------------

Made from PLA - You could go tougher if using really thick grease but probably not necessary

Standard 0.2mm Layer Height

Print Time approx 45mins on my Ender 3 ( Please add a make, if your printer can do it any faster )

Tagi