1 / 1
Print-in-place Track Tensioner for SkidSteer v3.0 — zdjęcie 1

Print-in-place Track Tensioner for SkidSteer v3.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a "print in place" version of the track tensioner for the incredible ProfessorBoots v3.0 RC SkidSteer.

Ocena
5 / 5
Polubienia
8
Pobrania
66
Wydruki
1
Wyświetlenia
271
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I found the track tensioner pulley assembly to be brittle when printed in PLA and breaks easily. This combines the mount and the pulley into one part, with included tolerance between the parts and a solid shaft to allow for a stronger part. Once the support material is removed the pulley should be able to spin freely (some cleanup may be required based on support placement and printer tolerances).