1 / 2
Cutter lever for Smolboi's bmg extruder for k1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a small slot to use #4 hobby blades as I have many of them lying around.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 1123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
This is a small edit to add a #4 hobby blade into the cutter lever, blade needs to be snapped down to 14mm in order to rest at the original cutting edge.
Once snapped off insert into lever this may require a good amount of force, I used a printed block and the back of a screwdriver to knock it in place.
Thanks Smolboi for throwing this model up!
