1 / 15
Frosthaven organiser for EU mini sleeves, less plastic/alt. version + (Boss box & token holders) — zdjęcie 1
1 / 15

Frosthaven organiser for EU mini sleeves, less plastic/alt. version + (Boss box & token holders)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix for cards with the slightly larger European mini standard sleeves, reduced volumes, standee holding boss & pip box

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
198
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

Absolutely love the idea by @LeonH for the monster trays and other card holders.

I printed all in PLA (prusament galaxy black / eSun fire red / eSun white/Sunlu green (turquoise)) with 0.6 nozzle and 0.3mm layer height (text with 0.2mm).

I found the slots for the initiative trackers quite tight, so widened them a bit more to not need to squish them in and damage the cardboard.

I found that the monster trays work just fine without a lid, so I am just using the cardboard cards for this. It is a little less stable, but if you are a little careful it is fine. To reduce overall space, I also found that you can combine some monsters in a single box:

(I sorted mine alphabetically, so for me these made sense to combine):

  • Harrower Infester & Hound
  • Savvas Ice & Lava Flow
  • Rendering & Spitting Drake
  • Living Bones & Spirit
  • Burrowing Blades & Deep Terror
  • Abael Herder & Algox Archer
  • Ancient Artillery & Algox Snow Speaker
  • (I did not do this, but could have): Lightning Eel & Ice Wrath

Print tips for the trays (prusaSlicer):

  • make sure the seams do not coincide on both sides /positions of the same wall

    Additional models / parts:
  • pip holders to hold the tiny character tokens in place + lid
  • Boss box with pull out tray for standees

 

For the mini boxes, I just use a cardboard box from a Kinder Bueno (8x) package. For the floor overlay tiles etc. I use the original foam packaging cut to size + the small token plastic box that came with the game. This saves plastic and is more lightweight.

Note: I still need to add the large trays, I realised that also the character boxes and trays tend to bend (getting a belly) over time, and then the lid (character box) and dividers start sliding out. Solution: add a single rib connector near the bottom of the trays connecting the “belly” sides (still to be implemented).

I had this sitting as a draft for quite a while. I hope this is useful to somebody! (even though not perfected :)

Tagi