Pipe Insulation / Lagging Cutting Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig to cut pipe insulations in 45° angles
- Ocena
- 5 / 5
- Polubienia
- 821
- Pobrania
- 3159
- Wydruki
- 7
- Wyświetlenia
- 20 365
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added versions for 15, 22, 28, 44 and 56mm outer diameter. I added a slot in the middle so the jig can be slightly compressed or stretched to match also minor size variations.
I printed it with PETG in 0,2mm structural IS preset. No supports required if printed vertically:
Update 22.03.2024:
As requested in the comments I added a version without the middle slot. Also added 15mm version.