1 / 1
T34 muddy in fog " Filament Painting " — zdjęcie 1

T34 muddy in fog " Filament Painting "

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hueforge litography for filamentpainting. Size 10x15cm "Loving my content? Show some love with a thumbs up 👍❤!"

Ocena
0 / 5
Polubienia
11
Pobrania
45
Wydruki
1
Wyświetlenia
546
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

T34 muddy running trought the fog .. 

 

#############################################################################


Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA 3Dpower Green Transmission Distance: 5.6
PLA JakobFilament Brown Transmission Distance: 0.4
PLA 3Dpower Grey Transmission Distance: 2.7
PLA Aurapol Orange Transmission Distance: 4.4
PLA 3Dpower Silver Transmission Distance: 4.4
PLA 3Dpower Biege Transmission Distance: 3.6
PLA 3Dpower Light Grey Transmission Distance: 0.4
PLA Jamghe White Transmission Distance: 5.2

Swap Instructions:
Start with Black
At layer #13 (0.64mm) swap to Green
At layer #14 (0.68mm) swap to Brown
At layer #16 (0.76mm) swap to Grey
At layer #25 (1.12mm) swap to Orange
At layer #26 (1.16mm) swap to Silver
At layer #35 (1.52mm) swap to Biege
At layer #36 (1.56mm) swap to Light Grey
At layer #39 (1.68mm) swap to White for the rest.


#############################################################################

"Loving my content? Show some love with a thumbs up 👍❤!"

Enjoy :-)

Tagi