1 / 4
Adapter for Carrera Digital 143 Control Unit Conversion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows you to attach you Carrera Digital 143 Start to the bigger Control Unit (CU) from Carrera Digital 132/124.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 2458
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
You want to use your Carrera Digital 143 with 4 to 6 cars and all other features from Digital 132/124 then converting a CU is the first step!
I broke up the adapter into 3 parts as it was too big to fit on my build plate. One screw did not go in at the end as there is a slight offset but it was good enough to use it and I did not spend any further time. If that's an issue for you, please go ahead and improve it (and give me a shout).
Basic Instructions:
- Print out all 3 parts (1, 2 and bottom)
- Detach road and bottom plate from original CU
- De-solder contacts from road
- Screw on part 1 and 2
- Solder new start/road from Carrera Digital 143
- Screw on bottom part.
Don't forget to also convert the controllers, they need a RJ-11 jack and some sanding to fit into the CU. I'm sure you can find some instructions online.