Gamalta Aquarium Light Stand (Canteliver 18 inch light)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a great way to make your aquarium more visible and keep your plants happy!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 577
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This will hold your 18-24 inch gamalta aquarium light at an angle 7 inches from the base. This should fit other aquarium lights too if they are less than 17mm thick.
I would recommend your walls to be .18 mm thick at least (three walls for a 0.6 mm nozzle) and 15% infill,
The leg should be mirrored, for printing, and the heat inserts should be put into the bottom of the 7-inch cantilever part.
Parts:
1x Aquarium 7-inch cantilever
1x 12- Aquarium .5 leg
1x (Mirrored) 12- Aquarium .5 leg
2x m4x16 mm screw
2x m4 heat insert